Thunder Dragon. Kommer som byggesett. Karosseriet er ferdiglakkert i rødt.
TBLE-04S fartskontroller og 540 motor medfølger.
Må kompletteres med:
- Radio og mottaker
- Servo
- NiMH eller LiPO batteri
- Batterilader
Anbefales:
- Kulelagre: 4stk 850 (5x8x2.5), 17stk 1150 (5x11x4)
Fra produsenten:
Length: 390mm. Image shows painted and assembled kit.
| Thunder & Flame This assembly kit creates an updated re-release version of the classic R/C off-road buggy Thunder Dragon, which appeared in a Japanese cartoon in the 1980s. Its ABS bathtub frame is tough and allows easy maintenance, while 4-wheel double wishbone suspension uses CVA oil dampers and a front stabilizer for a superior ride. Sealed gearboxes front and rear contain differentials with die-cast 3-bevel types for smooth, superior handling feel, and semi-pneumatic spike tires give great grip. The streamlined body is molded in polycarbonate, with non-canopy sections painted in silver. It is pre-cut for convenience. |
| Tough Shaft-Driven 4WD The midship motor, shaft-driven 4WD chassis is based around a lightweight and tough monocoque, with 4-wheel independent double wishbone suspension attached to gearboxes: an easy maintenance layout using upper “I” and lower “H” arms. Dual CVA oil dampers at the rear and a single one in the front monoshock setup are joined by a front stabilizer for optimal flex. Gear differential units front and rear are in sealed gearboxes, and an aluminum motor mount further improves reliability. |
 ★Front double wishbone suspension utilizes upper “I” arms and lower “H” arms for a ground hugging drive. |
 ★A front monoshock setup employs a CVA oil damper and helps limit roll when your buggy is cornering. |
 ★A close-up on the aluminum motor mount, which facilitates rigidity and superior heat dissipation. |
 ★The double wishbone suspension setup at the rear employs dual CVA oil dampers for a smooth ride. |
 ★Dish design wheels help mud and dirt to slide right off, and are paired with grippy spike tires. |
 ★A polycarbonate chassis cover provides protection from dirt, and features a driver figure for realism. |
| Specifications ★Length: 390mm, Width: 240mm, Height: 139mm ★Wheelbase: 260mm ★Minimum ground clearance: 23mm ★Tread: 203mm (front), 194mm (rear) ★Bathtub frame ★Tire width/diameter: 38/83mm (front and rear) ★Shaft-driven 4WD ★3-bevel differential gears (front and rear) ★3-piece steering tie-rod ★4-wheel independent double wishbone suspension ★Gear ratio = 7.68:1 ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately. |
| Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger |
Information is current as of July 6, 2021. Specifications are subject to change without notice.
| Merke | TAMIYA |
|---|---|
| Chassis | Thundershot |
| Skala | 1:10 |
| Drift | 4WD |
| Leveres som | KIT |
| Motor | BØRSTE |
| Drivkraft | ELEKTRO |
| Publiseringsdato | Oktober 2021 |
Relaterte produkter
Bildeler
Bildeler
Pinjonger
