1/10 R/C Toyota GR Yaris. Kommer som byggesett.
Toyota GR Yaris ble lansert i 2020. Den er laget av Toyota i et samarbeid med Gazoo Racing. Utviklet for å møte kravene til WRC (World Rally Championship).
TBLE-02S fartskontroller og 540 motor medfølger. Må kompletteres med:
- Radio og mottaker
- 4.8 ~ 7.4kg servo eller sterkere
- NiMH eller LiPO batteri
- Batterilader
- PS lakk
Anbefales:
Bruk av NiMH batteri anbefales, eventuelt ekstern LiPO alarm eller annen fartskontroller ved bruk av LiPO. Det er grunnet at TBLE-02S sin cut-off er beregnet for LiFE batterier.
Tamiya har et bredt sortiment med maling. Du kan se hele sortimentet her.
Anbefalte farger:
PS-5 Black
PS-31 Smoke
PS-48 Semi-Gloss Silver Anodized Aluminum
PS-60 Bright Mica Red
Fra produsenten:
Length: 372mm. Image shows painted and assembled kit.
| A lively drive Announced in 2020, this 4WD sports car boasts a compact three-door hatchback body. It features different exciting grades: the high power RZ and the high performance RZ, the RC competition spec, and the FF layout RS model. All are paired with the GR-FOUR sports 4WD system and a 272hp 1.6-liter 3-cylinder engine. This R/C model assembly kit captures such features the prominent radiator grille, bulging rear fenders and roof rear spoiler, and recreates the powerful body in polycarbonate. The front wheel drive M-05 chassis facilitates a lively drive, and uses black 11-spoke wheels with tires carved with realistic tread patterns. |
 |
 |
★Left: Rendering of powerful front mask.
★Right: Separate door mirrors with depictions of turn signals. |
 |
 |
★Left: Features a powerful image with bulging rear fenders and roof rear spoiler.
★Right: Black 11-spoke wheels have tires with realistic tread patterns and inner sponge. |
| M-05 Chassis: Low Center of Gravity, High Performance! The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. 11-spoke wheels are molded in black and have tires with realistic tread patterns and inner sponge. In this kit, the chassis is setup with the 239mm L wheelbase. |
 |
 |
★Left: A centerline steering servo is at the heart of the 3-piece steering tie-rod for superb response.
★Right: This image gives a closer look at the front double-wishbone suspension with friction dampers. |
 |
 |
★Left: The kit includes a transponder stay component, which is a must for those who want to race.
★Right: The rear section can be re-configured for three different wheelbases (this model: 239mm). |
| Specifications ★Length: 372mm, Width: 168mm, Height: 137mm ★Wheelbase: 239mm ★Tread (Front & Rear): 138mm ★Tire Width/Diameter (Front & Rear): 25/59mm ★Monocoque Frame ★Front midship motor and front wheel drive system ★3-Bevel Differential Gear ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front & Rear Friction Dampers ★Gear Ratio = 5.8:1 ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately) |
| Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger |
Information is current as of October 5, 2020. Specifications are subject to change without notice.
| Merke | TAMIYA |
|---|---|
| Chassis | M-05 |
| Skala | 1:10 |
| Drift | 4WD |
| Leveres som | KIT |
| Motor | BØRSTE |
| Drivkraft | ELEKTRO |
| Publiseringsdato | Oktober 2021 |
Relaterte produkter
Bildeler
